JBL Endurance Peak in-Ear Waterproof Sport Headphones User Manual


JBL Endurance Peak in-Ear Waterproof Sport Headphones



  • COLOR: Black
  • PLAYBACK: 28 hours


Shades of black With the JBL Endurance PEAK headphones, release all restraints and prepare to perform at a higher level. Enjoy the convenience of a completely wireless workout for up to 28 hours (4 hours + 24 hours of backup power) without having to recharge the headphones. However, if you feel like you still have something to contribute, all it takes is 10 minutes to recharge before listening to another hour of upbeat music. The JBL Endurance PEAK headphones simply power on and off as you put them on thanks to the PowerHook technology, so they’re prepared to take on every workout whenever you are. Additionally, you may turn off your TWS headphones with the PowerHook without constantly reaching for your charging case.

The JBL Endurance PEAK are guaranteed never to hurt or fall out and have an adjustable hook that goes over the ears for added security in addition to its IPX7 waterproof design. With Bluetooth wireless, you can stream high-quality music for an entire 8 hours without having to worry about untidy cords interfering with your workout thanks to 28 HOURS OF COMBINED PLAYBACK. You can charge your headphones for an hour’s worth of use in just ten minutes. The JBL Endurance PEAK headphones are made to be worn in all types of weather and include IPX7 and sweat-proof construction. enduring and built to withstand any conditions


  • JBL Endurance PEAK Headphones
  • Deluxe Hardshell Case
  • Micro-USB Charging Cable
  • Charging Case


  1. After turning on, the earphones immediately enter Bluetooth pairing mode if connecting for the first time.
  2. Press once, tap twice, and hold the touch control panel on the right earbud for 5 seconds to pair with a new device.
  3. the JBL – Endurance Peak reset.


The earbuds should be inserted into your ear downward. To lock in place, turn counterclockwise. For comfort, adjust.


  • Choose your ear tips.
  • The earbuds should be fitted with the enhancers and ear tips.
  • TWISTLOCK Innovation.


  • Your headphones will start to play once you press the power button.
  • The headset should be in Bluetooth mode.
  • Select the Bluetooth section from the “Menu” by accessing it.
  • You can now see a list of the gadgets within your wireless signal’s range.
  • In this list, look for the name of the model of your headphones.


On your device, click “Settings” and then “Bluetooth.” Make sure Bluetooth is activated (your device will automatically scan for a compatible connection) On your JBL headphones’ name, tap. If a password prompt appears, type “0000.”

Frequently Asked Questions

What is the charging time for the JBL endurance peak?

The Peak earphones take two hours to fully charge and may be quickly recharged when the battery is running low. In the scenario, 10 minutes can be played again for an hour.

Why won’t my JBL headphones pair with Bluetooth devices?

The list of Bluetooth devices that are available does not include JBL headphones. Your headphones not showing up in the Bluetooth devices list is most frequently caused by their not being in pairing mode. Verify that the headphones are turned on.

Why does one of my earbuds only function?

Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

How can you fix Bluetooth earphones that only work on one side?

Restarting the headset is the first step to solving a Bluetooth earphones issue. If that still doesn’t fix the issue, try pairing and Bluetooth reset. If it fails, try the audio settings on your computer or mobile device.

Why does the endurance peak on my JBL keep going out?

Our JBL Endurance Sprint contains a power-saving function called Auto-off. If they are not in use, it will shut off automatically after five minutes.

Why are the red flashes on my JBL headphones?

Low battery levels are indicated by a JBL speaker that is blinking red. Depending on the model, this may differ, but it is typically a sign that your speaker needs to be charged. Each JBL model will have a variable flashing LED intensity and frequency.

Where is the JBL headphones’ pairing button?

On the right ear cover’s bottom, press the “Bluetooth” button. The sound that follows will be audible. Your JBL Live wireless headphones are in pairing mode if they make that sound. The blue power light on the right ear cover’s back will also begin to blink.

How can I make my JBL Endurance PEAK’s bass louder?

No bass or treble controls are integrated into our JBL Endurance Peak II. To customize the audio of the headphones to your tastes, utilize an equalization app on your phone.

Can I use my JBL Endurance PEAK while showering?

I was immediately interested when JBL announced the Endurance Peak, largely for the two reasons I just stated. It is not just sweatproof but also IPX7-rated, meaning it should be able to withstand a heavy downpour or shower. Meanwhile, the buds are held firmly in place by springy hooks.

Is noise cancellation available with JBL Endurance PEAK?

The JBL Endurance Peak are effective in reducing background noise. The in-ear fit helps physically filter out background noise even though they lack an active noise canceling (ANC) capability.

Leave a Comment

All the data shown above will be stored by www.rajpostexam.com on https://www.rajpostexam.com/. At any point of time, you can contact us and select the data you wish to anonymise or delete so it cannot be linked to your email address any longer. When your data is anonymised or deleted, you will receive an email confirmation. We also use cookies and/or similar technologies to analyse customer behaviour, administer the website, track users' movements, and to collect information about users. This is done in order to personalise and enhance your experience with us. Click here to read our Cookie Policy.