EERF II
quick startguide
WHAT’S IN THE BOX
how to wear
First time use
power on & connect
DUAL CONNECT
 |
 |
power off
Manual Controls
| power on & connect to device | Reconnecting left & righr | power on \power off |
 |
 |
 |
BUTTON COMMAND
BUTTON COMMAND| 1. Stereo Mode | 2. Mono Mode |
 |
|
Charging
led behaviors
TECH SPEC
TECH SPEC| Model: | FREE II |
| Driver size: | 5.6 mm / 0.22” Dynamic driver |
| Power supply: | 5 V 1 A |
| Weight: | 61.6 g/0.135 lbs |
| Earpiece: | 4.8 g/0.011 lbs/pc (9.6 g /0.021 lbs combined) |
| Charging case: | 52 g/0.114 lbs |
| Headset battery type: | Lithium-ion Battery (55 mA / 3.7 V) |
| Charging case battery type: | Lithium-ion Battery (650 mA / 3.8 V) |
| Charging time: | <2 hrs from empty |
| Music play time with BT on: | up to 6 hrs |
| Frequency response: | 20 Hz – 20 kHz |
| Impedance: | 16 ohm |
| Sensitivity: | 100 dB [email protected] kHz / 1 mW |
| Maximum SPL: | 95 dB |
| Microphone sensitivity: | [email protected]\1mW |
| Bluetooth version: | 5.0 |
| Bluetooth profile version: | A2DP 1.3, AVRCP 1.5, HFP 1.7 |
| Bluetooth transmitter frequency range: | 2.4 GHz – 2.48 GHz |
| Bluetooth transmitter power: | <12 dBm |
| Bluetooth transmitter modulation: | GFSK, π/4-DQPSK, 8DPSK |
| Maximum operation temperature: | 45 °C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLFREE2) have also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.673 W/kg.The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user ear and the product (including the antenna). Head exposure that does not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLFREE2
FCC ID: APIJBLFREE2
HP_JBL_FREE II_QSG_SOP_V4
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Documents / Resources
 |
JBL Free II True Wireless Earbuds [pdf] User Guide JBLFREE2, APIJBLFREE2, Free II True Wireless Earbuds, Free II, True Wireless Earbuds |
References
