Quantum 610 Wireless Gaming Headset
Installation Guide
JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine
Software requirements Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation *Always use the latest version of Windows 10 (64 it) or Windows 11 for the most optimal experience on JBL QuantumENGINE
*JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation is required.
WHAT’S IN THE BOX
WHAT’S IN THE BOX 
002 Requirements
JBL QUANTUM ENGINE SOFTWARE REQUIREMENTS
Platform: Windows 10 (64 bit only) / Windows 11
500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC | VR
| Connectivity | PC | PS4/PS5 | XBOX™ | Nintendo Switch™ | Mobile | MAC | VR |
| 3.5 mm Audio Cable | Stereo | Stereo | Stereo | Stereo | Stereo | Stereo | Stereo |
| 2.4G Wireless |  JBL QuantumSURROUND™ & DTS HEADPHONE: XV2 |
Stereo | Not Compatible | Stereo | Not Compatible | Stereo | Stereo |
OVERVIEW
| 01 Game audio-chat balance dial 02 Volume Control 03 Detachable Windshield foam 04* Notification LED for mic mute / unmute 05* RGB-lit JBL logo 06 CHARGING LED 07 3.5mm Audio Jack 08 USB-C port |
09 Voice Focus Boom Microphone 10 Flat-fold ear cup 11* Microphone Mute / unMute 12 POWER / 2.4G LED 13 POWER ON / OFF slider 14 2.4G PAIRING BUTTON 15 Volume Control 16 MIC MUTE BUTTON |
POWER ON & CONNECT
SETUP
First-time setup
7a Connect the headset to your PC via a 2.4G USB wireless connection.
7b Go to “Sound Settings” -> “Sound Control Panel”.
7c Under “Playback” highlight “JBL QUANTUM610 WIRELESS GAME” and select “Set Default” -> “Default Device”.
7d Highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
7e Under “Recording” highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
7f In your chat application select “JBL QUANTUM610 WIRELESSCHAT” as the default audio device.
7G Follow the onscreen instructions to personalize your sound settings.
MICROPHONE
MICROPHONE
CHARGING
CHARGING
LED BEHAVIOURS
LED BEHAVIOURS
TECH SPEC
| Models: | QUANTUM610M/QUANTUM610TMM |
| Driver size: | 50 mm Dynamic drivers |
| Frequency response: | 20 Hz – 20 kHz |
| Microphone frequency response: Max | 100 Hz -10 kHz |
| input power | 30 mW |
| Sensitivity: | 100 dB SPL @1 kHz / 1 mW |
| Maximum SPL: | 95 dB |
| Microphone sensitivity: | -40 dBV/Pa @1 kHz |
| Impedance: | 32 ohm |
| 2.4G Wireless transmitter power: | <14 dBm |
| 2.4G Wireless modulation: | GFSK, π/4 DQPSK |
| 2.4G Wireless carrier frequency: | 2400 MHz – 2483.5 MHz |
| Battery type: | Li-ion battery (3.7 V / 1000 mAh) 5 V |
| Power supply: | 2:00 AM |
| Charging time: | 3 hrs |
| Music play time with RGB lighting | 40 hrs |
| off: Microphone pickup pattern: | Unidirectional |
| Weight: | 357 g |
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610M) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.023 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain etal parts in its assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610TMM) has also been tested against this SAR limit According to his standard, the highest SAR value reported during product certification for body use is 0.262 W/Kg.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ610M
Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in a violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
IC: 6132A-JBLQ610TMM
FCC ID: APIJBLQ610M
FCC ID: APIJBLQ610TMM
Documents / Resources
 |
JBL Quantum 610 Wireless Gaming Headset [pdf] Installation Guide JBLQ610TMM, APIJBLQ610TMM, Quantum 610, Wireless Gaming Headset, Quantum 610 Wireless Gaming Headset |
