JBL Reflect In Ear Wireless Sport Headphone Quick Start Guide

To check for pricing and place an order for ear tips, please call our JBL Customer Support team.

please try pairing via Bluetooth our JBL Reflect Contour 2 with another source device (smartphone, tablet). If the issue does not occur with another source device, you can follow the troubleshooting steps from our ‘Bluetooth Troubleshooting Guide’. If the issue is happening with other source devices or if the troubleshooting did not fix the issue, you may contact our customer support: https://support.jbl.com/us/en/#contact

Check to see if the device you wish to connect to is turned on. For three to five seconds, press and hold the inline microphone’s center button. To hear the audio prompt, we advise inserting one ear tip inside your ear.

A red blinking LED shows that the battery needs to be recharged with the power adapter because it is very low.

The center button on your earbuds can be held down for five seconds until it shuts off, at which point you can turn your headphones back on to enter Bluetooth mode.

You can stream music and take calls with JBL True Wireless headphones without having to deal with tangled connections. By using Bluetooth, keep in touch with your device and one another.

With an IPX5 water-resistant rating, the sweatproof, lightweight aluminum design can handle the rigors of a rigorous workout.

Despite the product’s resistance to moisture and perspiration, prolonged exposure to water can harm your headphones.

Although they are “sweat proof,” they cannot be used in the shower or when swimming, so you can exercise while wearing them without worrying.

Unfortunately, we are unable to change the auto-off setting. The headphones will immediately turn off thanks to the device’s energy-saving feature whenever no audio signal is detected from it.

To prevent overcharging, lithium batteries include a built-in auto-off feature that activates when a full charge is attained. The battery level will need to go below a particular level, even while still plugged in, in order to start charging once more.

Your earbuds are not waterproof; thus they cannot be submerged in water. Furthermore, your earbuds might become corroded and damaged by exposure to salt, chlorine, chemicals, and solvents.

Speakers are not waterproof by nature, but you can treat them with a simple spray to make them water-resistant. Use polyurethane or high glass polymer varnish to coat your outdoor speakers and stop water damage.

Simply push the button located between the up and down volume controls to answer a call. This is the same button you use to pause or resume music while using the headphones to listen to music. While wearing headphones, simply press the same button to end a call.

You can take calls while wearing these headphones, yes.