JBL WIND3S Portable Bluetooth Handlebar Speaker User Guide

Contents hide

Ezoicreport this ad

JBL-logo

JBL WIND3S Portable Bluetooth Handlebar Speaker

JBL WIND3S Portable Bluetooth Handlebar Speaker-fig1

Bicycle Mount

  1. Previous Track Install the included mounting bracket onto bicycle handlebars.

    JBL WIND3S Portable Bluetooth Handlebar Speaker-fig2

  2. Dock/undock the speaker into the mounting bracket effortlessly

    JBL WIND3S Portable Bluetooth Handlebar Speaker-fig3

WHAT’S IN THE BOX

JBL WIND3S Portable Bluetooth Handlebar Speaker-fig4
JBL WIND3S Portable Bluetooth Handlebar Speaker-fig5
JBL WIND3S Portable Bluetooth Handlebar Speaker-fig6
JBL WIND3S Portable Bluetooth Handlebar Speaker-fig7

BUTTONS

JBL WIND3S Portable Bluetooth Handlebar Speaker-fig8

Bluetooth pairing

JBL WIND3S Portable Bluetooth Handlebar Speaker-fig9

CHARGING

JBL WIND3S Portable Bluetooth Handlebar Speaker-fig10

WATERPROOF DUSTPROOF IP67

JBL WIND3S Portable Bluetooth Handlebar Speaker-fig11

TECH SPEC

  • Transducer: 43 x 47 mm / 1.5″
  • Output power: 5 W RMS
  • Frequency response: 110 Hz – 20 kHz
  • Signal-to-noise ratio: > 85 dB
  • Battery capacity: 1050 mAh
  • Battery charge time: 2.5 hours (5 V 1 A)
  • Music play time: up to 5 hours (dependent on volume level and audio content)
  • Bluetooth® version: 5.0
  • Bluetooth® profile: A2DP 1.3, AVRCP 1.6
  • Bluetooth® transmitter frequency range: 2400 MHz – 2483.5 MHz
  • Bluetooth® transmitter power: <6 dBm (EIRP)
  • Bluetooth® transmitter modulation: GFSK, π/4 QPSK, 8DPSK
  • Dimensions (W x H x D): 90 mm x 73.2 mm x 35.8 mm
  • Weight: 0.230 kg
  • Maximum operation temperature: 45 °C

SAFETY INSTRUCTION

  • To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
  • Do not expose the JBL Wind 3S to liquids without removing cable connection. Do not expose JBL Wind 3S to water while charging. It may result in permanent damage to the speaker or power source.
  • Chemicals, salt or “foreign particles” in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it’s completely dry and clean. Charging when wet might damage your speaker.
  • When using an external adapter, the output voltage/ current of the external adapter should not exceed 5V/3A.

Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN
International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Documents / Resources

JBL WIND3S Portable Bluetooth Handlebar Speaker [pdf] User Guide
WIND3S Portable Bluetooth Handlebar Speaker, WIND3S, WIND3S Speaker, Portable Bluetooth Handlebar Speaker, Handlebar Speaker, Portable Bluetooth Speaker, Bluetooth Speaker, Portable Speaker, Speaker

Leave a Comment